DM3 TUV Certified industrial vacuum cleaner for fine dust extraction

After long and stringent testing, the DM3 achieved TÜV certification for the extraction of fine and/or toxic dust. In its certified configuration, the vacuum cleaner comes equipped with a large surface filter, antistatic suction hose and collection bags for toxic waste. The right industrial vacuum cleaner when it comes to removing fine and harmful dust from the workplace.

Advantages

  • Largest surface filter in its category
  • Integrated filter cleaning system
  • Complete steel construction
  • Extractable collection container with optional use of disposable bags
  • Three powerful by pass motors with independent cooling
  • Compact and mobile
  • Easy filter replacement
  • TUV certification of suitability for the suction of fine and toxic powders, in compliance with dust classes H (European standards DIN -EN 60335-2-69 / 2015 and IEC 60335-2-69 / 2012).

Datasheet

  • DM3 TUV H
  • DM3 TUV M
Index Unit DM3 TUV H
Voltage V – Hz 230 – 50
Power kW 3,45
Max waterlift mmH2O 2.500
Max air flow m³/h 540
Suction inlet mm 80
Noise level (EN ISO 3744) dB(A) 76
Filter Type Star
Surface – Diameter cm²-mm 20.000 – 500
Material – Efficiency IEC 60335-2-69 Polyester – ANT M
Air load on filter m³/m²/h 270
Cleaning system Manual
Discharge system Roll-out container
Capacity lt. 100
Dimensions cm 77x66x150h
Weight kg 85
ndex Unit DM3 TUV M
Voltage V – Hz 230 – 50
Power kW 3,45
Max waterlift mmH2O 2.500
Max air flow m³/h 540
Suction inlet mm 80
Noise level (EN ISO 3744) dB(A) 76
Filter Type Star
Surface – Diameter cm²-mm 20.000 – 500
Material – Efficiency IEC 60335-2-69 Polyester – M
Air load on filter m³/m²/h 270
Cleaning system Manual
Discharge system Roll-out container
Capacity lt. 100
Dimensions cm 77x66x150h
Weight kg 85